This fact sheet covers firewall configuration regarding Act&Match webinar service subcontractor services and future product deployments involving their servers.

1. Act&Match webinar service subcontractor has an outbound service ports configured for each end every user.
Outbound connection may be established through TCP ports 1935, 80 or 443 and UDP ports 20000 – 60000.
Act&Match webinar service subcontractor services are not configured to listen or require any inbound connections.
For optimal use we recommend outbound configurations via TCP ports mentioned above that are 1935, 80 and 443. 2. TCP ports 1935, 443 or 80 and UDP ports 20000 – 60000 are fully configured for outbound connections with integrated VoIP and Webcam Video.

3. For best performance, and to avoid blocking or latency we recommend to verify the below IP ranges and specify an exception in your firewall system configuration to exclude them from content or application data scanning filters.

4. Should your security policies require exact specification of distinct IP ranges, we encourage you to limit firewall configuration to TCP port 1935, 80 or 443 and UDP ports 20000 – 60000 destined for listed Act&Match webinar service subcontractor IP ranges in the table.

Important notice: Unless absolutely necessary we do not recommend to configure your firewall based on steps 3 and 4 as IP ranges need to be occasionally audited and monitored, implementing further maintenance to your network. These changes are not occurring very often, however they may be indispensable to constantly provide stable and the best performance of Act&Match webinar service subcontractor services.

All information regarding Firewall Configuration can be found in the table below.

Last update : July, 2024